PRODUCTS » HDMI
HD-PSW 1.3a
Pure silver HDMI cable
1.For better projection and lossless visual quality, Pure silver conductor which has the highest electric conductivity in the all metals is employed for its main signal conductor.
2.Flat structure makes the length and the distance of each wire even up compared to regular round structure cable. It attenuates timing errors of signals, cross-talk, and signal losses caused by unequal length of each wire.
3.Furthermore, the flat cable are tend not to produce deformation inside cable caused by bending and also tend not to generate transmission loss caused by hi-frequency noise by jitter.
4.The separated shielding structure is employed for noise protection. It affects to prevent external noise contaminations and attenuate mutual interference among wires.
5.For its insulator, the low-dielectric form polyethylene which has excellent flexibility and strength.
6.The connector shell is made by not a general pressing but pressure die casting in order to solve the problem of resonance on the joint surface.
7. The contacts are made of phosphor bronze an plated by 50μ24K gold plating in order to prevent signal loss by aging degradation or contact resistance. This enhances durability and stability of transmission property of HD-PSW.
8.Infrared reflow soldering method is employed for stable quality control of connection part. It attenuates margins of impedance and latency between signals and ensures stable signal path.
2.Flat structure makes the length and the distance of each wire even up compared to regular round structure cable. It attenuates timing errors of signals, cross-talk, and signal losses caused by unequal length of each wire.
3.Furthermore, the flat cable are tend not to produce deformation inside cable caused by bending and also tend not to generate transmission loss caused by hi-frequency noise by jitter.
4.The separated shielding structure is employed for noise protection. It affects to prevent external noise contaminations and attenuate mutual interference among wires.
5.For its insulator, the low-dielectric form polyethylene which has excellent flexibility and strength.
6.The connector shell is made by not a general pressing but pressure die casting in order to solve the problem of resonance on the joint surface.
7. The contacts are made of phosphor bronze an plated by 50μ24K gold plating in order to prevent signal loss by aging degradation or contact resistance. This enhances durability and stability of transmission property of HD-PSW.
8.Infrared reflow soldering method is employed for stable quality control of connection part. It attenuates margins of impedance and latency between signals and ensures stable signal path.
FEATURES
------------HD-PSW 1.3a SPEC--------------HDMI : HIGH SPEED with ETHERNET
Frequency range: 340MHz (10.2Gbit/s )
Max transmit band: 1440p (1080p/1440p)対応 (Max resolution：4K2K（4,096×2,160)
Max flame rate：120Hz(1080p)
Connector：HDMI plug (19 pin - Type A)
Housing : PBT + 30% GF (UL 94V ? 0)
Contact material : Phosphor Bronze / 24K gold [thickness:50μm]
Shell material : zinc alloy/24K gold [thickness : 15μm]
Cable: 19conductors HDMI flat cable
[(28AWG x 2 + EAMS) x 4 + (30AWG x 7 + A)] UL20276
Cable diameter : 3.5 x 13.6mm
Main signal path
28AWG 4Pconductor [material：Pure silver wire(Φ0.5mm single wire)]
Insulator : Foamed PE (Polyethylene)
Shielding material:
1.Aluminum foil cohesive polyester film (covered rate: 100%)
2. OFC copper spiral shield (covered rate : 85%)
Sub signal path
30AWG 7C [material : OFC copper]
Insulator : Polyolefin
Shield: Aluminum foil cohesive polyester film (遮蔽率 : 100%)
Outer sheath: PVC
Mesh tube: PET
Lineup
1.0ｍ
1.8ｍ
3.0ｍ
5.0ｍ